What to look at in live data
Compare the speed the ECU reads with the phone's GPS speed, while someone else drives and the phone is held by the person in the passenger seat. At a steady speed they should be close; the speedometer usually shows a little more than both.
If the ECU speed stays at zero, jumps or drops out for a moment while the GPS says the car is moving, the signal is being lost: sensor, connector or wiring. On many cars the speed comes from the ABS wheel sensors, so check whether the ABS light is on too.
How serious is it and can you drive?
Severity is medium. You can drive gently, but bear in mind that without speed cruise control won't work, the speedometer isn't reliable and, if ABS is involved, braking and stability control may not step in as usual. Keep longer distances and get it checked soon.
Read P0500 on your car
With an OBD2 adapter, DrivePulse reads your car's fault codes and tells you what they mean, whether you can drive and what to check. It's read-only: it writes nothing to the ECU.
Get DrivePulseWhat it means
Vehicle speed is used by many control units: the engine for idle and fuel use, the automatic gearbox to decide when to shift, cruise control, the speedometer. Older cars have a dedicated sensor on the gearbox; newer ones work speed out from the ABS wheel sensors and share it over the internal network. With P0500 the ECU says the signal is missing or not believable, for example zero while the engine runs in gear for a long time.
Symptoms
- The speedometer stops, jumps or reads zero.
- Cruise control won't engage.
- On automatics, odd or late shifts.
- Sometimes the ABS and stability control lights come on too.
- A slightly rough idle as you slow down to a stop.
Most likely causes, in order
- The speed sensor, or the wheel sensor the signal is taken from.
- The connector or wiring, exposed to dirt, water and salt near the wheels or on the gearbox.
- A dirty or damaged reluctor ring, the toothed ring the sensor reads.
- An ABS problem that stops speed reaching the other control units.
- Rarely, the ECU.
What to check before the garage
- See whether the ABS or stability lights are on alongside the check engine light: if so, the problem is nearly always at one wheel.
- If you've recently had tyres, discs or bearings changed, check that the sensor cable is still clipped in place and undamaged.
- Compare the speedometer with your phone's navigation speed: if the speedometer reads zero while you're moving, the code is real.
At the garage: what to ask for
A reading of the four wheel speeds and the gearbox speed while the car moves: the one that stays at zero or jumps points to the sensor. Then a check of wiring and reluctor ring, before replacing the sensor.
What DrivePulse shows
DrivePulse reads P0500 and opens its card with causes and checks. The live Dashboard shows the speed the car reports: if it stays at zero or jumps while the car moves steadily, the signal really is lost. While driving, the passenger watches the screen, not the driver.
On many cars DrivePulse also tells you how far you have driven with the light on, which helps you see how long the problem has been there.
Frequently asked questions
Can I drive with P0500?
Yes, gently. But without speed the speedometer isn't reliable and, if ABS is involved, braking can behave differently: keep longer distances.
Why does the ABS light come on too?
Because on many cars the speed comes from the ABS wheel sensors. If one stops working, both the ABS and the engine notice.
Can cleaning the sensor be enough?
Sometimes: metal debris on the sensor tip or the reluctor ring disturbs the signal. If the code returns, the wiring and sensor get checked.
Related codes
Related guides
- Buying a used car? What to check: a code cleared just before the sale shows up in the distance driven since the last clear.
What you need to read it
All you need is an ELM327 OBD2 adapter, plugged into the diagnostic port, usually under the steering wheel. On iPhone it has to be Bluetooth Low Energy (BLE) or Wi-Fi, like the Veepeak OBDCheck BLE or the Vgate iCar Pro 2S; on Android classic Bluetooth adapters work too, once paired in the phone's settings. Veepeak recommends DrivePulse to its customers, and the Vgate is the one the Italian site Macitynet tested together with the app. The full list is on Which adapters work.
DrivePulse is on iPhone and Android. It's read-only: it writes nothing to the ECU and doesn't clear codes. You try it for 7 days from the first connection or for 15 trips, whichever comes first, then unlock it with a single purchase, no subscription and no account.