What to check before the garage
- The battery's condition: resting voltage and how the starter turns when cranking.
- The engine ECU fuses, listed in the handbook.
- Note when it happens: on starting, over bumps, in the rain. For an intermittent fault it's the most valuable information.
What to look at in live data
If engine values freeze or disappear for a moment while you read live data, then come back, communication with the engine ECU is coming and going: the same fault U0100 records. If it happens on the move, the phone is held by the person in the passenger seat: note the moment, because a pothole, the cooling fan starting or rain points to where to look.
Watch the voltage the ECU reads: if it collapses when a large load switches on, such as the fan or the heated rear window, or if it keeps swinging, communication can drop because of it. In that case battery, alternator and ground cables need checking before you suspect the ECU.
How serious is it and can you drive?
Severity is high, because without communication with the engine the gearbox, assisted brakes and dashboard can behave oddly, and the engine may stall. If the engine runs smoothly, drive carefully, only as far as the garage. If it stalls or all the lights flash together, stop.
Read U0100 on your car
With an OBD2 adapter, DrivePulse reads your car's fault codes and tells you what they mean, whether you can drive and what to check. It's read-only: it writes nothing to the ECU.
Get DrivePulseWhat it means
The control units in a modern car constantly exchange information over a network, the CAN bus: engine speed, road speed, temperature, torque requests. Each one expects certain messages at regular intervals. With U0100 a control unit says it hasn't received anything from the engine ECU for a while.
Codes starting with U are communication faults. This one isn't stored by the engine ECU but by the others, which have lost sight of it.
Symptoms
- Several warning lights on at once.
- Gauges dropping to zero for an instant, or the rev counter and temperature disappearing.
- Automatic gearbox in limp mode.
- In the worst cases, the engine stalls or won't start.
- Sometimes everything returns to normal after a restart: the fault is intermittent.
Most likely causes, in order
- The engine ECU's power or earth: a weak battery, a fuse, a corroded earth.
- The CAN network wiring, with a damaged wire or a corroded connector.
- Another faulty control unit disrupting the whole network.
- The engine ECU failing.
At the garage: what to ask for
A readout of codes from every control unit, to see which ones lost the engine and since when, then measurements of the ECU's power and earths and of the CAN network. Replacing a control unit is the last step.
What DrivePulse shows
DrivePulse shows U0100 when a control unit that stored it responds on the OBD port, and opens its card with causes and checks. If at that moment the engine ECU isn't responding to DrivePulse either, the problem is happening right now.
In Health, the resting battery voltage and the cranking test help rule out the simplest cause: a weak power supply.
Frequently asked questions
Can I drive with U0100?
If the engine runs smoothly, carefully to the garage. If it stalls or the warning lights go haywire, stop.
Does it mean the ECU is broken?
Not necessarily. More often it's the power supply, an earth or a network wire. The ECU is checked last.
Why does the fault come and go?
Because it's often a contact that opens with vibration, heat or moisture. Noting when it happens helps the garage a lot.
Related codes
Related guides
- Buying a used car? What to check: a code cleared just before the sale shows up in the distance driven since the last clear.
What you need to read it
All you need is an ELM327 OBD2 adapter, plugged into the diagnostic port, usually under the steering wheel. On iPhone it has to be Bluetooth Low Energy (BLE) or Wi-Fi, like the Veepeak OBDCheck BLE or the Vgate iCar Pro 2S; on Android classic Bluetooth adapters work too, once paired in the phone's settings. Veepeak recommends DrivePulse to its customers, and the Vgate is the one the Italian site Macitynet tested together with the app. The full list is on Which adapters work.
DrivePulse is on iPhone and Android. It's read-only: it writes nothing to the ECU and doesn't clear codes. You try it for 7 days from the first connection or for 15 trips, whichever comes first, then unlock it with a single purchase, no subscription and no account.