What to look at in live data
Cooling fan speed is not among the standard OBD2 data; some cars report it through the manufacturer's diagnostics, as rpm or as a percentage command. The standard data does show its work: with the engine warm, idling and parked, watch coolant temperature. When it reaches around 95 to 105 °C the fan should start and bring it down a few degrees; with a slow fan the temperature keeps climbing, especially with the air conditioning on.
Switch the air conditioning on: on many cars the fan starts straight away or nearly, and you can hear it. If it turns slowly, has bearing noise or stops now and then, the motor is at the end of its life; if it doesn't turn at all, check the fuse, relay or fan control module, which sets the speed on recent cars. A slow fan shows above all in summer traffic queues: there, read by the person in the passenger seat, the temperature should stay steady, not keep rising.
How serious is it and can you drive?
Severity is medium. While moving, the air coming through the front is enough, but in traffic and in summer the engine can run hot. Keep an eye on the temperature gauge: if it rises above normal, stop and switch the engine off. Until it's fixed, avoid traffic jams, long climbs and very hot days.
Read P0494 on your car
With an OBD2 adapter, DrivePulse reads your car's fault codes and tells you what they mean, whether you can drive and what to check. It's read-only: it writes nothing to the ECU.
Get DrivePulseWhat it means
Modern fans have a control module or a resistor that sets their speed, and a signal that tells the engine control unit how fast they are turning. If the command asks for a speed and the fan doesn't reach it, P0494 appears.
Fan 1 is the first one, or the only one: on cars with two fans the second has its own codes. The code doesn't say why the fan is slow, only that it can't keep up.
Symptoms
- Engine temperature rises in traffic or at a standstill, and drops when you move off.
- The air conditioning cools less when the car is stopped.
- The fan is noisier than usual, hums or whines, or starts and stops.
- Check engine light on; on some cars the fan stays at full speed to protect the engine.
Most likely causes, in order
- A worn fan motor, with tired brushes or stiff bearings: it turns, but it struggles.
- Something slowing the fan down: leaves, dirt, a piece of plastic, a bent shroud.
- The fan control module or resistor, not giving it full voltage.
- A corroded connector or a fuse making poor contact, so the fan gets less current.
What to check before the garage
- With the engine off and cold, look for anything blocking the fan, without putting your hands in: on many cars it can start even with the ignition off.
- With the engine running and the car standing still, switch on the air conditioning: the fan usually starts after a short while. Listen to whether it spins up properly or stays slow and noisy.
- Check the fan fuse in the fuse box, following the owner's manual.
Slow, stopped or too fast
Different faults have different codes. When the command doesn't reach the fan, because of a wire or a relay, the control unit stores a circuit code such as P0480. When it does reach it but the fan turns too slowly, as here, it's P0494. A fan that turns faster than it should has its own code, P0495.
That's why with P0494 the first suspect isn't the wiring but the fan itself: a tired motor or something holding it back. A struggling fan does get hot and draws more current, though, so the fuse and connector are worth a look too.
At the garage: what to ask
Running the fan from the diagnostic tool at different speeds, and measuring current and voltage: a fan that draws too much current has a worn motor. In order of cost: cleaning and checking the fuse and connector, the fan control module or resistor, a new fan assembly.
What DrivePulse shows
DrivePulse reads P0494 and opens the radiator fan card, with the check to do without putting your hands in and the advice to avoid traffic and heat until it's fixed; it also tells you whether the code is pending or confirmed.
In the live Dashboard you see the coolant temperature. With the engine running and the car standing still, with the air conditioning on, the fan should start and the temperature stay steady: if it rises above normal, switch the engine off. While driving, the passenger watches the screen, not the driver. In Health the engine temperature is part of the checks on every trip.
Frequently asked questions
Can I drive with P0494?
Yes, with care: while moving the air is enough, in traffic and heat it isn't. If the temperature rises above normal, stop and switch the engine off.
What's the difference from P0480?
P0480 is a problem in the circuit that controls the fan. P0494 says the command gets through but the fan turns too slowly: usually the fan motor or something holding it back.
Does the whole fan need replacing?
Often yes, if the motor is worn: it is usually sold together with the blades and the shroud. First, though, rule out dirt, the fuse and the connector, which cost little.
Related codes
Related guides
- Buying a used car? What to check: a code cleared just before the sale shows up in the distance driven since the last clear.
What you need to read it
All you need is an ELM327 OBD2 adapter, plugged into the diagnostic port, usually under the steering wheel. On iPhone it has to be Bluetooth Low Energy (BLE) or Wi-Fi, like the Veepeak OBDCheck BLE or the Vgate iCar Pro 2S; on Android classic Bluetooth adapters work too, once paired in the phone's settings. Veepeak recommends DrivePulse to its customers, and the Vgate is the one the Italian site Macitynet tested together with the app. The full list is on Which adapters work.
DrivePulse is on iPhone and Android. It's read-only: it writes nothing to the ECU and doesn't clear codes. You try it for 7 days from the first connection or for 15 trips, whichever comes first, then unlock it with a single purchase, no subscription and no account.