EN ▾
EnglishItalianoDeutschFrançaisEspañolPortuguêsČeštinaPolskiMagyarRomână
Download
  1. DrivePulse
  2. Fault codes
  3. Cooling and oil
  4. P0597

P0597: thermostat heater control circuit open

On many engines the thermostat is controlled by the ECU through a small heater that makes it open earlier. With P0597 that circuit is open. The engine usually runs, but temperature is no longer managed as it should be.

Get DrivePulse

What to look at in live data

The value to follow is coolant temperature. With an electronically controlled thermostat the ECU keeps it higher at light load and brings it down when power is needed; with P0597 the thermostat heater gets no current and the thermostat only opens at its base temperature, so under load the temperature does not come down as it should.

While someone else drives and the phone is held by the person in the passenger seat, follow the temperature uphill or on the motorway: if it climbs more than usual and does not come back down, the driver should ease off and the car should be checked soon. If it stays normal, the code still needs fixing, because the engine is not running at its intended temperature.

How serious is it and can you drive?

Severity is medium. You can usually drive gently: the thermostat still opens on its own at its set temperature. If the temperature climbs above normal or the temperature warning lights up, stop and switch off.

Read P0597 on your car

With an OBD2 adapter, DrivePulse reads your car's fault codes and tells you what they mean, whether you can drive and what to check. It's read-only: it writes nothing to the ECU.

Get DrivePulse

What it means

A conventional thermostat opens on its own at a set temperature. Many modern engines have a map-controlled thermostat instead: inside it an electric heater, driven by the ECU, warms it so it opens earlier when the engine is working hard, and leaves it shut longer in gentle driving to save fuel. With P0597 the ECU says this heater's circuit is open: the command isn't getting through.

It's a common code on several makes, for example many BMWs and Opels (Vauxhalls).

Symptoms

  • Often just the light.
  • Engine temperature a bit higher than usual under load, or lower than usual on the motorway, depending on the fault.
  • The radiator fan cutting in more often.
  • Sometimes P0128 or P2181 appear too.

Most likely causes, in order

  • The thermostat's internal heater open circuit: the most common fault.
  • The thermostat connector corroded or with coolant inside.
  • The wiring between ECU and thermostat.
  • A fuse.

What to check before the garage

  • With the engine cold, check the coolant level. Never open the cap on a hot engine.
  • Look at the thermostat connector, if you can reach it: traces of coolant or corrosion are a clue.
  • Keep an eye on engine temperature over the next few trips, especially uphill and on the motorway.

At the garage: what to ask for

A resistance measurement of the thermostat at its connector and a wiring check. If the heater is open circuit, on almost every engine the complete thermostat is replaced, with its seal and a top-up of the correct coolant.

What DrivePulse shows

DrivePulse reads P0597 and opens its card, which explains that on many cars the thermostat is replaced as a unit. The live Dashboard shows coolant temperature: compare it across different kinds of driving to see whether the engine runs too hot or too cool. While driving, the passenger watches the screen, not the driver.

Statistics show how many minutes on average it takes to reach temperature, useful for seeing whether the behaviour has changed.

Frequently asked questions

Can I drive with P0597?

Usually yes, gently. If the temperature climbs above normal, stop and switch off.

Does the whole thermostat need replacing?

Almost always: the heater is inside the thermostat and can't be replaced on its own. It's worth ruling out the connector and wiring first, though.

What's the difference from P0128?

P0128 says the engine stays too cool, whatever the cause. P0597 says the electric control of the map-controlled thermostat isn't working.

Why does the ECU heat the thermostat?

To have two working temperatures: higher in gentle driving, to save fuel, and lower under load, to protect the engine. Without the control, only the thermostat's own opening temperature is left.

Related codes

Related guides

What you need to read it

All you need is an ELM327 OBD2 adapter, plugged into the diagnostic port, usually under the steering wheel. On iPhone it has to be Bluetooth Low Energy (BLE) or Wi-Fi, like the Veepeak OBDCheck BLE or the Vgate iCar Pro 2S; on Android classic Bluetooth adapters work too, once paired in the phone's settings. Veepeak recommends DrivePulse to its customers, and the Vgate is the one the Italian site Macitynet tested together with the app. The full list is on Which adapters work.

DrivePulse is on iPhone and Android. It's read-only: it writes nothing to the ECU and doesn't clear codes. You try it for 7 days from the first connection or for 15 trips, whichever comes first, then unlock it with a single purchase, no subscription and no account.

← All codes