What to look at in live data
If the car reports intake cam timing, compare requested and actual angle. At idle the ECU usually asks for little advance: if actual is far ahead of requested and does not come back, the phaser is stuck advanced, often because of dirty oil or a solenoid valve that does not close.
With the car stationary, blip the throttle a few times and watch how actual chases requested: it should catch up quickly, usually in under a couple of seconds. If it arrives late, overshoots and swings, oil is not reaching the phaser as it should. After an oil change, the same test shows straight away whether things have improved.
How serious is it and can you drive?
Severity is medium. You can drive gently, but the engine performs worse and, if low oil is the cause, it's worth fixing straight away: the same oil lubricates the whole engine. If you hear chain noise or P0016 appears, only drive as far as the garage.
Read P0011 on your car
With an OBD2 adapter, DrivePulse reads your car's fault codes and tells you what they mean, whether you can drive and what to check. It's read-only: it writes nothing to the ECU.
Get DrivePulseWhat it means
Many modern engines advance or retard intake valve opening depending on revs and load, using a cam phaser on the camshaft. The phaser moves thanks to oil pressure, metered by a solenoid. The ECU requests a position and checks where it actually ends up: with P0011 it says that on bank 1 the real position is too far advanced, or the system isn't responding as it should.
Symptoms
- Rough idle, sometimes stalling at idle.
- Less power and slower response.
- Higher fuel consumption.
- A metallic noise for a few seconds on a cold start.
Most likely causes, in order
- Low, old or wrong-grade oil: the phaser runs on oil pressure, and it's the most common and cheapest cause.
- The phaser control solenoid, dirty or stuck, sometimes with its small screen clogged.
- A worn cam phaser.
- A worn chain and tensioner.
What to check before the garage
- The oil level, with the engine cold and the car level.
- The date and mileage of the last oil change: if the service is close or overdue, do it now with the grade in the handbook.
- After the oil change, drive for a few days and see whether the code returns.
At the garage: what to ask for
First a check of oil level, type and pressure. Then a test of the phaser solenoid, commanding it with the tool and watching whether the camshaft moves. If the solenoid is fine, a check of the phaser and chain.
What DrivePulse shows
DrivePulse reads P0011 and opens its card, which tells you to check oil level and condition right away. It also shows other timing codes, such as P0016 and P0014, and whether the code is pending or confirmed.
In the maintenance deadlines you can record the last oil change, so you always know when it was done and get reminded of the next one.
Frequently asked questions
Can an oil change fix P0011?
Often yes, if the oil was low, old or the wrong grade. It's the first thing to do, and the cheapest.
Can I drive with P0011?
Gently, yes. But if you hear chain noise or P0016 appears too, only to the garage.
What's the difference from P0014?
P0011 is about the intake camshaft, P0014 the exhaust one. Causes and checks are the same.
Which oil should I use?
The grade and specification in the handbook, meaning the manufacturer's approval code as well as the viscosity numbers. A thicker or thinner oil changes the pressure the phaser works with, and that alone can be enough to trigger P0011.
Related codes
Related guides
- Buying a used car? What to check: a code cleared just before the sale shows up in the distance driven since the last clear.
What you need to read it
All you need is an ELM327 OBD2 adapter, plugged into the diagnostic port, usually under the steering wheel. On iPhone it has to be Bluetooth Low Energy (BLE) or Wi-Fi, like the Veepeak OBDCheck BLE or the Vgate iCar Pro 2S; on Android classic Bluetooth adapters work too, once paired in the phone's settings. Veepeak recommends DrivePulse to its customers, and the Vgate is the one the Italian site Macitynet tested together with the app. The full list is on Which adapters work.
DrivePulse is on iPhone and Android. It's read-only: it writes nothing to the ECU and doesn't clear codes. You try it for 7 days from the first connection or for 15 trips, whichever comes first, then unlock it with a single purchase, no subscription and no account.