EN ▾
EnglishItalianoDeutschFrançaisEspañolPortuguêsČeštinaPolskiMagyarRomână
Download
  1. DrivePulse
  2. Fault codes
  3. Mixture and intake air
  4. P0172

P0172: system too rich, bank 1

The ECU is taking away more fuel than it should, and the mixture is still too rich. It's the opposite of P0171, and the causes are different.

Get DrivePulse

What to look at in live data

Look at the bank 1 fuel trims with the engine warm: with P0172 they are well below zero, because the ECU is taking fuel away as it sees a rich mixture. Added together, beyond about minus 20 to 25%, depending on the car, the code appears.

If the trim is very negative mostly at idle, look at leaking injectors, fuel pressure that is too high or fuel vapour coming from the charcoal canister. If it is negative at all revs, the first suspect is a mass air flow sensor that reads more air than there is. A slow or dirty oxygen sensor can give wrong readings too.

How serious is it and can you drive?

Severity is medium. You can drive gently, but it's worth acting soon: the extra fuel fouls the plugs and overheats the catalytic converter, which wears out over time. If the check engine light flashes, ease off and stop as soon as you can.

Read P0172 on your car

With an OBD2 adapter, DrivePulse reads your car's fault codes and tells you what they mean, whether you can drive and what to check. It's read-only: it writes nothing to the ECU.

Get DrivePulse

What it means

The oxygen sensor in the exhaust tells the ECU whether the mixture has too much or too little fuel, and the ECU corrects it. With P0172 the correction has had to take away fuel beyond its limit, and that wasn't enough: the mixture stays rich. Bank 1 is the side with cylinder 1; if P0175 appears too, the cause is shared by both sides.

Extra fuel that doesn't burn completely ends up in the catalytic converter and on the spark plugs. That's why running rich for a long time ruins the converter.

Symptoms

  • Higher fuel consumption.
  • A smell of petrol from the exhaust.
  • Rough idle, sometimes misfires.
  • Black, sooty spark plugs.

Most likely causes, in order

  • The fuel vapour purge valve stuck open, sending petrol vapour into the engine when it shouldn't.
  • A leaking or dripping injector.
  • The air mass sensor measuring more air than is coming in.
  • Fuel pressure too high.
  • The engine temperature sensor reading cold on a warm engine, so the mixture gets enriched.
  • A badly clogged air filter.
  • A contaminated oxygen sensor, less often.

What to check before the garage

  • The air filter: it's cheap and the first thing to look at.
  • Engine temperature when warm: if it's very low, the sensor or the thermostat can be the cause.
  • If the car struggles to restart right after refuelling, tell the garage: it's a clue pointing to the purge valve.

At the garage: what to ask for

A check of the purge valve, fuel pressure and injectors, a comparison between measured and expected air flow and a test of the temperature sensor. The oxygen sensor gets replaced last.

What DrivePulse shows

DrivePulse reads P0172 and opens its card with causes and checks. In Health you find the engine mixture: when running rich the long-term fuel trim is strongly negative, meaning the ECU is taking fuel away.

In the live data you can watch fuel trims at idle and at 2,500 rpm, engine temperature and air mass flow. A temperature that never rises, for example, explains a rich mixture without looking any further.

Frequently asked questions

Can I drive with P0172?

Yes, gently. But don't leave it for months: running rich fouls the plugs and eventually ruins the catalytic converter.

What's the difference from P0171?

P0171 is a lean mixture, too much air; P0172 is a rich mixture, too much fuel. The causes are almost opposite.

Do injector cleaners help?

They can help if an injector is only dirty. If it leaks, it needs a garage.

Related codes

Related guides

What you need to read it

All you need is an ELM327 OBD2 adapter, plugged into the diagnostic port, usually under the steering wheel. On iPhone it has to be Bluetooth Low Energy (BLE) or Wi-Fi, like the Veepeak OBDCheck BLE or the Vgate iCar Pro 2S; on Android classic Bluetooth adapters work too, once paired in the phone's settings. Veepeak recommends DrivePulse to its customers, and the Vgate is the one the Italian site Macitynet tested together with the app. The full list is on Which adapters work.

DrivePulse is on iPhone and Android. It's read-only: it writes nothing to the ECU and doesn't clear codes. You try it for 7 days from the first connection or for 15 trips, whichever comes first, then unlock it with a single purchase, no subscription and no account.

← All codes