What to look at in live data
It is the same check as P0420, on bank 2, the group of cylinders without cylinder 1 (almost always V and boxer engines, and some inline sixes). With the engine warm and in closed loop, the bank 2 sensor before the converter switches, while the one after should stay almost steady, usually between 0.5 and 0.8 V. If it copies the front one, the converter on that side no longer stores oxygen.
Compare the fuel trims of the two banks: if bank 2 is very different from the other, look for a mixture problem on that side, because that alone can set P0430. An exhaust leak ahead of the rear sensor skews its reading.
How serious is it, can you drive?
Severity is medium. You can drive, but emissions get worse and with the code active the emissions test is at risk. If the light flashes or the engine misfires, slow down and get to a garage: misfires ruin the converter quickly.
Read P0430 on your car
With an OBD2 adapter, DrivePulse reads your car's fault codes and tells you what they mean, whether you can drive and what to check. It's read-only: it writes nothing to the ECU.
Get DrivePulseWhat it means
On V and boxer engines the cylinders sit in two rows, called banks. Bank 1 is the one with cylinder number 1, bank 2 is the other, and each has its own catalytic converter and oxygen sensors. Inline engines have no bank 2.
To judge the converter, the ECU compares the oxygen sensor before it with the one after. If the sensor after the converter swings almost as much as the one before, the converter isn't doing its job and P0430 is set.
Symptoms
- Engine light on, often with nothing else unusual.
- Sometimes a rotten-egg smell from the exhaust.
- If the converter is clogged, less power uphill and when accelerating.
- Higher emissions: with the code active, the emissions test is at risk.
Most likely causes, in order
- A lazy oxygen sensor after the converter: a frequent false alarm.
- An exhaust leak before the sensor, skewing the reading.
- Misfires or a wrong mixture that have damaged the converter.
- An aged converter, which remains the last suspect.
What to check before the garage
- The other codes: if there are misfires or mixture problems, fix them first, because they are the cause and the converter is the victim.
- Whether P0420 is there too: when both converters drop off together, the culprit is often something that affects both, such as the mixture or the fuel.
- With a cold engine, a ticking or puffing from the exhaust at start-up: it's the typical sign of a leak.
- Don't rush to replace the converter: the sensor and leaks cost much less.
At the garage: what to ask for
A live comparison of the two bank 2 oxygen sensors, a search for exhaust leaks and a misfire check. Only then a test of the converter. In order of cost: sensor, exhaust repair, converter, which is the most expensive item.
What DrivePulse shows
DrivePulse reads P0430 and opens its card, with the advice to rule out the sensors and leaks first; it also tells you whether the code is pending or confirmed. In Health you find the engine mixture with the long-term fuel trim, and on cars that expose them, misfires cylinder by cylinder.
In the live data, on cars that report them, you can watch the oxygen sensors: the one before should swing and the one after stay fairly steady. The Before the inspection card tells you how many self-test monitors are ready, so you know whether they've finished their checks after the repair.
Frequently asked questions
Can I drive with P0430?
Yes, but emissions get worse and the emissions test is at risk. If the light flashes or the engine misfires, get to a garage soon.
What's the difference from P0420?
It's the same check on two different sides of the engine: P0420 is bank 1, the side with cylinder number 1, and P0430 is bank 2.
Do I need a new converter straight away?
No. First rule out the oxygen sensor after the converter, exhaust leaks and misfires, which cost much less and are often the real cause.
Related codes
Related guides
- Buying a used car? What to check: a code cleared just before the sale shows up in the distance driven since the last clear.
What you need to read it
All you need is an ELM327 OBD2 adapter, plugged into the diagnostic port, usually under the steering wheel. On iPhone it has to be Bluetooth Low Energy (BLE) or Wi-Fi, like the Veepeak OBDCheck BLE or the Vgate iCar Pro 2S; on Android classic Bluetooth adapters work too, once paired in the phone's settings. Veepeak recommends DrivePulse to its customers, and the Vgate is the one the Italian site Macitynet tested together with the app. The full list is on Which adapters work.
DrivePulse is on iPhone and Android. It's read-only: it writes nothing to the ECU and doesn't clear codes. You try it for 7 days from the first connection or for 15 trips, whichever comes first, then unlock it with a single purchase, no subscription and no account.