EN ▾
EnglishItalianoDeutschFrançaisEspañolPortuguêsČeštinaPolskiMagyarRomână
Download
  1. DrivePulse
  2. Fault codes
  3. Accelerator, idle and brake
  4. P0505

P0505: idle air control system malfunction

At idle the ECU meters a trickle of air to hold the engine at a precise speed. With P0505 it can't. In most cases a clean is enough.

Get DrivePulse

What to look at in live data

Watch idle rpm with the engine warm together with throttle position (or the commanded throttle actuator, on cars with an electronic throttle). With P0505 the ECU can't hold rpm where it wants: it hunts, drops too far when you switch on the air conditioning or the headlights, or stays high. Switch the air conditioning and fan on and off: a healthy idle dips slightly and settles back within a couple of seconds.

If the throttle (or the idle valve, on older cars) moves but rpm doesn't follow, the cause is often dirt in the throttle body or an air leak the ECU can't make up for: high fuel trims at idle confirm it. If the position doesn't change at all while rpm drops, the problem is the motor or its control; after cleaning, an idle relearn procedure is almost always needed.

How serious is it and can you drive?

Severity is medium. You can drive, but an engine that stalls at a junction or while manoeuvring is a risk. If it happens often, get it fixed soon.

Read P0505 on your car

With an OBD2 adapter, DrivePulse reads your car's fault codes and tells you what they mean, whether you can drive and what to check. It's read-only: it writes nothing to the ECU.

Get DrivePulse

What it means

When you're not pressing the accelerator, the ECU still has to let a little air in to keep the engine running at a precise speed, and correct it when you switch on the air conditioning or headlights. Older cars do this with a dedicated valve, newer ones with the electronic throttle. With P0505 it says idle speed isn't following what it asks for: the control isn't responding or isn't enough.

Symptoms

  • An uneven idle that rises and falls.
  • The engine stalls when you lift off or stop at lights.
  • Idle too high or too low with a warm engine.
  • Vibration at a standstill, especially with the air conditioning on.

Most likely causes, in order

  • A dirty throttle body or idle valve, coated in oil and carbon deposits: the number one cause.
  • An air leak from a hose or gasket.
  • No relearn after a clean or after disconnecting the battery.
  • A failed idle valve or throttle motor.

What to check before the garage

  • Look at the throttle body: if the inside and the edge of the throttle plate are black with deposits, cleaning is the first step.
  • Listen for a hiss at idle, a sign of an air leak.
  • If you've recently disconnected the battery, try leaving the engine idling for a few minutes and driving for a while: on many cars idle relearns by itself.

At the garage: what to ask for

Cleaning the throttle body with the dedicated spray and, afterwards, the idle relearn procedure. If idle stays odd, a smoke test for air leaks and a check of the idle valve or throttle motor.

What DrivePulse shows

DrivePulse reads P0505 and opens its card, which gives cleaning the throttle body as the first fix and reminds you about the relearn. The live Dashboard shows idle revs: a value that hunts, or changes a lot when you switch on the air conditioning, confirms the problem.

In Health, the engine mixture helps you see whether an air leak is involved too.

Frequently asked questions

Is cleaning the throttle body enough?

In most cases, yes. Use the dedicated spray with the engine off, and run the idle relearn afterwards.

Can I drive with P0505?

Yes, gently. If the engine often stalls at idle, get it fixed soon: stalling while manoeuvring is a risk.

What's the difference from P0507?

P0505 says idle control isn't working as it should. P0507 says, more precisely, that idle is higher than expected.

Why does idle change when I switch on the air conditioning?

Because the compressor takes power from the engine, and the ECU opens the air a little to compensate. If the control isn't working, idle drops or the engine stalls right at that moment.

Related codes

Related guides

What you need to read it

All you need is an ELM327 OBD2 adapter, plugged into the diagnostic port, usually under the steering wheel. On iPhone it has to be Bluetooth Low Energy (BLE) or Wi-Fi, like the Veepeak OBDCheck BLE or the Vgate iCar Pro 2S; on Android classic Bluetooth adapters work too, once paired in the phone's settings. Veepeak recommends DrivePulse to its customers, and the Vgate is the one the Italian site Macitynet tested together with the app. The full list is on Which adapters work.

DrivePulse is on iPhone and Android. It's read-only: it writes nothing to the ECU and doesn't clear codes. You try it for 7 days from the first connection or for 15 trips, whichever comes first, then unlock it with a single purchase, no subscription and no account.

← All codes