What to look at in live data
If the car shows oil pressure, look at it with the ignition on and the engine off: it should be zero or close to it. If it reads pressure with the engine stopped, or its maximum value, the problem is electrical: the sensor, its connector or the wire. Many cars have only a switch, which shows in the data as pressure present or absent.
With the engine running, warm and at idle, pressure should show as present and rise with revs. If it flips from present to absent while the engine runs smoothly and the red light stays off, the fault is more likely in the sensor or the wiring. If the red light comes on, switch the engine off: until proven otherwise, the pressure really is missing.
How serious is it and can you drive?
Severity is high, because it concerns oil. With the red light on, don't drive. Without the red light, with oil at the right level and the engine running smoothly, you can get to a garage gently, but don't put it off: if the sensor isn't working, you wouldn't be warned of a real pressure drop.
Read P0520 on your car
With an OBD2 adapter, DrivePulse reads your car's fault codes and tells you what they mean, whether you can drive and what to check. It's read-only: it writes nothing to the ECU.
Get DrivePulseWhat it means
Oil pressure tells you whether the engine is lubricated. A sensor measures it and sends it to the ECU, which switches on the red oil light if pressure is too low. With P0520 the ECU says the sensor circuit isn't working as it should: signal missing, out of range or inconsistent. It doesn't say pressure is low, it says it doesn't trust the reading.
The red oil light rule
If the red oil light comes on along with the code, stop safely straight away and switch off: an engine without oil pressure is damaged within minutes. If the red light stays off and the engine runs normally, it's almost certainly the sensor, but get it checked soon.
Symptoms
- Check engine light on.
- A red oil light that flickers on and off for no reason, or an oil pressure gauge that jumps.
- On some cars, dashboard warnings about oil level or pressure.
Most likely causes, in order
- A failed sensor, or one leaking oil from its body.
- The connector or wiring, often oily or heat-damaged.
- Less often, genuinely abnormal pressure: low oil, a worn oil pump, a clogged filter.
What to check before the garage
- The oil level, with the engine cold and the car level. If it's low, top up with the right oil before moving off.
- Look for oil leaks around the sensor, usually on the engine block near the oil filter.
- Check the sensor connector: fully seated and not soaked in oil.
At the garage: what to ask for
A measurement of oil pressure with a mechanical gauge fitted in place of the sensor. If pressure is fine, the sensor is replaced and the wiring checked. If it's low, the problem is in the engine and needs finding straight away.
What DrivePulse shows
DrivePulse reads P0520 and opens its card, with the warning up front: if the red oil light also comes on, stop at once. It tells you whether the code is pending or confirmed and shows any timing codes, such as P0011 and P0016, which also depend on oil pressure.
In the maintenance deadlines you can record the last oil change and get a reminder for the next one.
Frequently asked questions
Can I drive with P0520?
If the red oil light is off, the oil is at the right level and the engine runs normally, yes, gently to the garage. If the red light comes on, no: stop and switch off.
Does it mean the engine has no oil?
No, it means the ECU doesn't trust the reading. In most cases it's the sensor. The level still needs checking straight away.
Is the sensor expensive?
Usually not, and it's often easy to reach. It's still worth measuring the real pressure with a gauge first, to be sure the engine is fine.
Related codes
Related guides
- Buying a used car? What to check: a code cleared just before the sale shows up in the distance driven since the last clear.
What you need to read it
All you need is an ELM327 OBD2 adapter, plugged into the diagnostic port, usually under the steering wheel. On iPhone it has to be Bluetooth Low Energy (BLE) or Wi-Fi, like the Veepeak OBDCheck BLE or the Vgate iCar Pro 2S; on Android classic Bluetooth adapters work too, once paired in the phone's settings. Veepeak recommends DrivePulse to its customers, and the Vgate is the one the Italian site Macitynet tested together with the app. The full list is on Which adapters work.
DrivePulse is on iPhone and Android. It's read-only: it writes nothing to the ECU and doesn't clear codes. You try it for 7 days from the first connection or for 15 trips, whichever comes first, then unlock it with a single purchase, no subscription and no account.