What to look at in live data
P0691 is an electrical fault: the ECU drives the cooling fan and finds its control circuit voltage low, usually because of a short to ground or a failed relay or module. The fan has no value in the standard data, but you can see when it should be working: with the engine warm and the car parked, watch coolant temperature and listen for the fan starting once it passes about 95 to 105 °C.
With the air conditioning on, many ECUs call for the fan straight away: if it doesn't start even then, the command isn't getting through. The check is done with the engine off: fan relay or module, fuse, fan connector, control wire to the ECU. Until the fault is fixed, in summer traffic or uphill the temperature can climb past 110 °C: if the person in the passenger seat sees it get there, stop safely and switch the engine off.
How serious is it and can you drive?
Severity is medium, but it depends on traffic. On a flowing road you can drive gently to the garage. If the temperature gauge goes above normal, pull over as soon as it's safe and switch off the engine. Don't open the radiator cap on a hot engine.
Read P0691 on your car
With an OBD2 adapter, DrivePulse reads your car's fault codes and tells you what they mean, whether you can drive and what to check. It's read-only: it writes nothing to the ECU.
Get DrivePulseWhat it means
The engine ECU doesn't power the fan directly: it drives a relay or a module that sets the speed. On the control wire it expects a certain voltage. If it finds it too low, it stores P0691: control circuit low.
On the move, the air coming in through the front is enough to cool the radiator. The problem shows when standing still, in queues, climbing slowly or in summer with the air conditioning on: that's when the fan is needed.
Symptoms
- Check engine light on, sometimes the temperature warning too.
- Engine temperature rising in queues or when stationary, and dropping when you move off.
- Air conditioning cooling poorly when stationary.
- A fan that never starts, or that runs all the time, even with a cold engine.
Most likely causes, in order
- The fan relay or module failed.
- The control wire shorted to ground, crushed or chafed near the radiator.
- The fan or relay connector corroded or burnt.
- The fan motor stiff or seized, which makes the control circuit overheat and burn.
- The fan fuse, if it's tied to the control circuit.
What to check before the garage
- With the engine off and cold, look for anything blocking the fan, without putting your hands in: on some cars it can start even with the ignition off.
- With the engine running and the car standing still, switch on the air conditioning: the fan usually starts shortly after. Listen for it.
- Find the fan fuse and relay in the handbook and check whether the fuse is intact.
The real risk: summer traffic
While the car is moving, the engine stays at temperature even without the fan. In queues, standing still or climbing slowly, though, the temperature rises fast, and an overheated engine can ruin the head gasket.
That's why, until the repair, it's best to avoid queues, long climbs and very hot days, and to keep an eye on the car's temperature gauge.
At the garage: what to ask
Driving the fan with a diagnostic tool, measuring voltage and current in the circuit, and checking the relay, connectors and fan motor. In order of cost: fuse or relay, connector, wire repair, fan module, a new fan.
What DrivePulse shows
DrivePulse reads P0691 and opens the radiator fan card, with the warning about temperature in traffic and in summer; it also tells you whether the code is pending or confirmed.
In live data, on cars that report it, you'll find the coolant temperature. With the car standing still, the engine warm and the air conditioning on, you can see whether the fan keeps it steady: if it keeps rising above normal and you can't hear the fan, switch off the engine. While driving, the passenger watches the screen, not the driver.
Frequently asked questions
Can I drive with P0691?
On a flowing road, yes, gently. Avoid queues and slow climbs and, if the temperature goes above normal, pull over and switch off the engine.
The fan runs all the time: is it the same fault?
It can be. With the control shorted, on some cars the fan stops, on others it runs flat out as a safety measure. Either way the circuit needs checking.
Does the fan need replacing?
Not first. It's often the relay, a connector or the control wire. The fan is replaced if its motor is stiff or draws too much current.
Related codes
Related guides
- Buying a used car? What to check: a code cleared just before the sale shows up in the distance driven since the last clear.
What you need to read it
All you need is an ELM327 OBD2 adapter, plugged into the diagnostic port, usually under the steering wheel. On iPhone it has to be Bluetooth Low Energy (BLE) or Wi-Fi, like the Veepeak OBDCheck BLE or the Vgate iCar Pro 2S; on Android classic Bluetooth adapters work too, once paired in the phone's settings. Veepeak recommends DrivePulse to its customers, and the Vgate is the one the Italian site Macitynet tested together with the app. The full list is on Which adapters work.
DrivePulse is on iPhone and Android. It's read-only: it writes nothing to the ECU and doesn't clear codes. You try it for 7 days from the first connection or for 15 trips, whichever comes first, then unlock it with a single purchase, no subscription and no account.