What to check before the garage
- The engine ECU codes: if there are any, the real cause is almost always there, so start with those.
- The battery condition: resting voltage and how the starter turns over.
- If a control unit was recently replaced or updated, remember when: the problem may have started there.
What to look at in live data
U0401 is stored by another module, often the transmission or ABS module, when the data it receives from the engine ECU does not make sense. That is why it pays to read the codes of the other modules too, not just the engine: if the engine ECU has its own code for a sensor (rpm, throttle, temperature), that is almost always the place to start.
In the engine live data, watch the values the other modules rely on most: rpm, throttle and pedal position, calculated load, coolant temperature. One that jumps, gets stuck or shows impossible values (zero rpm with the engine running, -40 °C on a warm engine) explains the invalid message. Check the control module voltage too: below about 11 V while cranking or steadily above about 15.5 V with the engine running, modules can exchange bad data.
How serious is it, can you drive?
Severity is medium. You can usually drive gently, but some functions may be missing, such as cruise control, and an automatic gearbox may go into limp mode. If other symptoms appear, like the engine losing power or brake warning lights, the picture changes: follow the card for those codes.
Read U0401 on your car
With an OBD2 adapter, DrivePulse reads your car's fault codes and tells you what they mean, whether you can drive and what to check. It's read-only: it writes nothing to the ECU.
Get DrivePulseWhat it means
Unlike U0100, here the communication works: the engine ECU's messages arrive regularly. The problem is the content. A value out of range, data flagged as unreliable, a check that doesn't add up: the unit receiving them, usually the gearbox, the ABS or the instrument cluster, discards them and stores U0401.
The engine ECU often sends invalid data because it has a fault of its own: if one of its sensors fails, for example the accelerator or temperature sensor, the value it passes on to the others is flagged as unreliable.
Symptoms
- Warning lights on the dashboard, sometimes several.
- Automatic gearbox in limp mode or shifting oddly.
- Cruise control disabled.
- Gauges or cluster displays showing strange values.
Most likely causes, in order
- A fault in the engine ECU with its own codes: a sensor that isn't working makes invalid data reach the others. The most frequent case.
- Low battery voltage, making the control units exchange wrong data.
- Mismatched software after a control unit was replaced or updated.
- The CAN network wiring, with interference corrupting messages, more rarely.
At the garage: what to ask for
A reading of the codes from every control unit, starting with the engine ECU. Once the fault that makes the data invalid is fixed, U0401 usually goes away on its own. If it started after a replacement or update, check that every control unit has the right software.
What DrivePulse shows
DrivePulse shows U0401 when the control unit that stored it answers on the OBD port, and opens its card with causes and checks. Alongside it, it shows any engine ECU codes, which are the place to start.
In Health, the resting battery voltage and the cranking test help rule out a weak power supply.
Frequently asked questions
Can I drive with U0401?
Usually yes, gently. Some functions may be missing; if other symptoms appear, follow the card for those codes.
Does the engine ECU need replacing?
Hardly ever. More often it has a fault of its own, shown by other codes, or there's a battery or software problem.
What's the difference from U0100?
With U0100 the engine ECU's messages don't arrive at all. With U0401 they arrive, but contain invalid data.
Related codes
Related guides
- Buying a used car? What to check: a code cleared just before the sale shows up in the distance driven since the last clear.
What you need to read it
All you need is an ELM327 OBD2 adapter, plugged into the diagnostic port, usually under the steering wheel. On iPhone it has to be Bluetooth Low Energy (BLE) or Wi-Fi, like the Veepeak OBDCheck BLE or the Vgate iCar Pro 2S; on Android classic Bluetooth adapters work too, once paired in the phone's settings. Veepeak recommends DrivePulse to its customers, and the Vgate is the one the Italian site Macitynet tested together with the app. The full list is on Which adapters work.
DrivePulse is on iPhone and Android. It's read-only: it writes nothing to the ECU and doesn't clear codes. You try it for 7 days from the first connection or for 15 trips, whichever comes first, then unlock it with a single purchase, no subscription and no account.