What to check before the garage
- If the lights came on after work on the wheels, hubs or brakes, that wheel's sensor is the first suspect.
- The battery condition: resting voltage and how the starter turns over.
- Note whether the speedometer jumps at a certain speed or over bumps: it helps show which sensor to look at.
What to look at in live data
U0415 is stored by a module, often the engine or transmission module, when the data arriving from the ABS isn't valid: communication is there, but the content doesn't add up. In the standard data, the value that often comes from the ABS is vehicle speed: on the move, with the phone in the hands of the person in the passenger seat, compare it with the speedometer and with GPS. Jumps, zero readings while the car moves or a speed different from the real one explain the invalid message.
The starting point is the ABS's own codes: a wheel speed sensor (as in C0035) or an internal module problem sends wrong data to the other modules. If the ABS has no codes, check the control module voltage and the tyres: wheels of different sizes, or one tyre much more worn than the others, can make the ABS calculate speeds that don't add up, especially after a tyre change.
How serious is it, can you drive?
Severity is high, because it concerns the brakes. With ABS and ESP disabled the brakes still work, but in hard braking the wheels can lock and in bends the car doesn't have stability control to help. Drive carefully only as far as the garage, with longer distances. If the red brake warning light comes on, stop somewhere safe.
Read U0415 on your car
With an OBD2 adapter, DrivePulse reads your car's fault codes and tells you what they mean, whether you can drive and what to check. It's read-only: it writes nothing to the ECU.
Get DrivePulseWhat it means
The ABS module is the source of vehicle speed for many control units: the speedometer, the automatic gearbox, cruise control and stability control all use its data. If the module has a problem, it flags that data as unreliable.
With U0415 a control unit, usually the engine ECU or the gearbox, has received invalid values from the ABS module and discarded them. Very often the ABS module has a code in its memory that explains why, for example a wheel speed sensor.
Symptoms
- ABS, ESP or traction control lights on.
- Speedometer jumping or stopping, sometimes only now and then.
- Cruise control disabled and start-stop not working.
- Automatic gearbox shifting oddly or in limp mode.
Most likely causes, in order
- A wheel speed sensor that has failed, is fouled with rust or metal filings, or has damaged wiring.
- The ABS module with a fault of its own, shown by codes in its memory.
- Low battery voltage, making the control units exchange wrong data.
- An oxidised ABS module connector.
At the garage: what to ask for
A reading of the ABS module codes, where the real cause usually is, and a comparison of the four wheel speeds on a test drive: the one that behaves differently points to the sensor. Then cleaning or replacing the sensor, and a check of the module and its connector if the problem remains.
What DrivePulse shows
DrivePulse shows U0415 when the control unit that stored it answers on the OBD port, and opens its card with causes, checks and when to stop. It also tells you whether the code is pending or confirmed.
In Health, the resting battery voltage and the cranking test rule out a weak power supply. The rest is read from the ABS module with the garage's tool.
Frequently asked questions
Can I drive with U0415?
Only to the garage, carefully and with longer distances: ABS and ESP may be disabled. With the red brake light on, stop.
Does the ABS module need replacing?
Hardly ever as a first step. More often it's a wheel sensor or the battery; the module is only replaced if its own codes point to it.
Why does the speedometer stop?
Because on many cars the speed shown on the cluster comes from the ABS module. If its data isn't valid, the cluster doesn't use it.
Related codes
Related guides
- Buying a used car? What to check: a code cleared just before the sale shows up in the distance driven since the last clear.
What you need to read it
All you need is an ELM327 OBD2 adapter, plugged into the diagnostic port, usually under the steering wheel. On iPhone it has to be Bluetooth Low Energy (BLE) or Wi-Fi, like the Veepeak OBDCheck BLE or the Vgate iCar Pro 2S; on Android classic Bluetooth adapters work too, once paired in the phone's settings. Veepeak recommends DrivePulse to its customers, and the Vgate is the one the Italian site Macitynet tested together with the app. The full list is on Which adapters work.
DrivePulse is on iPhone and Android. It's read-only: it writes nothing to the ECU and doesn't clear codes. You try it for 7 days from the first connection or for 15 trips, whichever comes first, then unlock it with a single purchase, no subscription and no account.